Español
Horticutral Lighting
As we all know, solar lights are environmentally friendly and easy to install. However, if you miss some details, your solar lights may stay in the corner forever. Therefore, we conclude with some tips for you to make the best use of your solar lights according to the market research and customers’ feedback.
Where and How to Install?
You may wonder why the product manual says it would take 8 hours to charge, but actually, it took 10 hours or even more. According to our investigation, the installation position may be the problem. Please do not install solar lights under the shadow of buildings or trees. Otherwise, it may need a longer time to charge. Also, choosing proper settings based on local solar radiation is also important.
Why did it not work after installation?
First of all, the battery may run out due to a long-time transportation and needs to be charged So, please remember to turn the switch on and ensure the light works well before installation.
What’s more, in daylight, the installer may be uncertain whether the light works well. Since the solar panel comes together with the photo-cell sensor, which is used to detect sunlight to turn it off immediately, we can turn the solar panel back to the sunlight to check.
Additionally, putting something on the solar panel sometimes works too. For separated solar lights, you can also disconnect solar panel cables to check. BTW, it’s necessary to check if the battery is charging or not. Take AGC solar lights, for example, we can press the “Status” button on the remote control to check the battery Voltage.
Last but not least, If it still doesn't work, what should we do?
Most of the time, we can narrow down some issues through the working indicator. Meanwhile, we can open the fixture to check each part of the voltage. If the supplier connects incorrect cables or crosses the wrong polarity, it probably causes a short circuit in the whole system.
How to get the best sunlight radiation?
No matter where you install the panels, you’d better ensure optimal solar panel orientation. And adjust the best tilt angle of the solar panel according to your local latitude.
Usually, the separated solar LED light will be more flexible than all-in-one to get radiation. If you are unsure of the solar panel orientation, you can try to rely on a compass or compass app.
In general, when installing fixtures, you must make sure that solar panels can collect more sunlight and read the installation manual carefully. Do not use non-standard accessories to install the fixture! If there is a problem, you should contact your supplier at once.
AGC team would always like to help you select suitable products for your market, improve your project or sales channel competitiveness, and grow your sales revenue. Please contact us now to get more recommendations.
