Recently AGC Lighting improved a new product, aims to make warehouse lighting installation simpler and easier.
Below is it, the linkable solution for HiRack linear light:
Linkable Linear Light
At the end of the linear light there are two sockets, and the ends of cable are two pairing plugs. When plugs plugged into sockets and locked, lights will be connected up, LINKABLE function achieved.
Simple and Quick Installation
- Install the fixtures to target location with safety steel lines or brackets;
- Plug the cable plugs into sockets on the lights to link up.
You will find the installation so Simple and Quick and Easy.
IP65 Weatherproof Connections
The linear light, sockets and protective caps on it, and plugs on cables, all these are IP65 weatherproof.
So when installation finished, the whole project is IP65 weatherproof.
Varied Cable Length
The recommended spacing of fixtures is 6~8m, but in practical projects it can be adjusted.
When lights layout in a line, the cables length can also be varied.
Standard 8m cables can be offered as accessories. And if you want to use other length cables, IP65 plugs also can be offered to adapt.
Only ONE Power Cable
Please imagine that, when the lights installed in your warehouse, you only need one power cable for each line of fixtures.
Fixtures qty in each line can be 10pcs for 180W (220V voltage), and 30pcs for 60W, linkable distance can be 60~180m at least (just suppose a 6m spacing).
Fixtures qty in each line can be 10pcs for 180W (220V voltage), and 30pcs for 60W, linkable distance can be 60~180m at least (just suppose a 6m spacing).