Español
Horticutral Lighting
One of our customer touched the ST53 heat sink and felt very hot, he said ST53 heat dissipation is not good as ST36 street light.
Do you know what is the reason? Let’s see below pictures and analysis.
ST36 street light
- The heat dissipation rib is higher, and the air contact surface is larger to directly transfer the heat to the air.
- The contact area between the top and the hand is small, so we feel the temperature is lower.
ST53 street light：
- Because the internal heat dissipation rib is shorter, the heat can be transmitted to the surface of the radiator faster.
- The radiator surface is completely smooth, so there are more contact surfaces with hands, which will produce a very hot feeling.
- Therefore, in order to avoid the influence of this heat on the power supply, a separation groove is opened in the power supply and the light source cavity (the flow of air can further make the heat of the light source and the power supply take away together).
It works well in the open air where there's convection, our street light is mainly outdoor using, so the heat dissipation will be no problem.
ST53 LED Street Light keep Classic but different design, makes your product recognizable.
Smooth surface avoids accumulation of dust, sand, leaves, water and snow. If you like the street light with elegant appearance, please choose our ST53 street light, it is suitable for projects and also keeping stocks.
Below are some main features and Benefits of it:
- Wattage from 20-180W.
- LED modular is separated from the driver chamber by One U-type groove, it can enhance air convection and therefore bring excellent heat dissipation performance.
- Two options on lens
IK10: One-sheet PC lens design without glass, lumen output up to 165lm/W
IK08: 50*50mm modular lens and tempered glass, lumen output up to 160lm/W
IK08: More customize possibilities due to it is structurally compatible with SMD3030/3535/5050 chips.
- Type II III Optics, for street lighting/ area lighting/ Parking lots...
- Plug-and-play microwave/ PIR sensor optional - 1-10V, DALI, Photocell, Timing Control, Zhaga and Class II are available.
- It is easy to maintenance by loosing two screws of the bottom cover
If you’re interested to know more information about our ST53 street light.
Welcome to contact me by email Nancy, thank you.
