The Best LED High Bay Light for pharmaceutical factory

When planing the lighting of pharmaceutical factory you need to understand and follow the basic regulatory requirements for the lighting standard of pharmaceutical plant. These requirements related to good manufacturing practices currently followed in pharmaceutical industry.

many areas of pharmaceutical factory are less natural lighting due to production conditions , which requires high quality of lighting and requires good Color rendering and high efficiency of lights.

In general , each functional areas of pharmaceutical factory is large, and the rational selection of lighting fixtures has a great impact on the maintenance of cleanliness and energy saving. this also contributes to create a clean and tidy environment for pharmaceutical factory where has strict requirement to its environment .

An appropriate lighting intensity for office is 300-500 lux. It should be about 400 lux in all production areas and above 300 lux in sampling center and dispensing center. in order to get a good visual effect for checking things  , generally the lighting intensity of inspection area should be higher than other industries' inspection areas , needing its light to have the intensity above 500 lux. and it should be monitored of the light intensity in all areas .

office :300-500lux 

production area: about 400lux 

sampling center: more than 300lux

dispensing center: beyond 300lux 

inspection area: above 500lux 

so except for regular office lighting . it is worthy to consider such a kind of  high bay light with good performance for the drug production area .since the lighting condition of production area relates to the quality of drug . the lights that applied to the production area of pharmaceutical factory should be with some features as follow 

Smooth exterior and no exposed fasteners. 

as the main area of drug production, it is under strict dust-free production control . any sites that may accumulate dust should be avoided as far as possible, including lighting fixture . so when designing this food product processing  industrial application light, AGC lighting specially makes it a smooth, seamless and downward angled aluminum alloy housing  in case of gathering dust . and this light has no exposed fasteners especially those small parts . this can effectively guarantee the safety of the producing drug and prevent the drug from mixing with small parts once fasteners dropping.

Contains no glass and toxic material for food safety

it is a bigger threat if there is an accident that the glass of the lighting fixture break up and drop to the drug when processing medicine. moreover , if the material of lighting fixture contains toxic substance . The medicine in processing is likely to be polluted  and this will lead to drug going bad .it will become a challenge to the testing and certification of medicine . our this light design originally pay high attention to the selection of material  . it contains no glass and no toxic material  and suits for the production of food and drug .

waterproof rating IP66

good waterproof performance , rating IP66 , make it have the ability to adapt adverse environment .

Equipped with Microwave sensor modules and set by remote controller after installation

Super high efficacy up to 150 lm/w

as mentioned above , pharmaceutical factory is lack of natural light though some probably make full use of natural light  as far as possible . it's still hard to meet the basic brightness. our this light efficacy is up to 150lm/w .

Color Rendering Index can be up to Ra90

higher colour rending index compared to many congeneric lights  in the market  .truly restore the inward color of medicine .

https://www.agcled.com/products/led-high-bay-light/hb21.html?from=sopl